Since 1981....

SERVICE
PARTS
ACCESSORIES
FABRICATION
ENGINE CONVERSIONS
RESTORATIONS
We're Second to None!


Home


News

Latest LAND-ROVER Restorations

Dalai Lama LAND-ROVER Project

Defender Project by WCBR

Best 88" LAND-ROVERs ever!

 Rover Motor Co History

North American Specials

V8 Prototype "Golden Rod"

Engines by WCBR

Parts Department

Technical Bulletins

Want to fit a Diesel?

MG Competition Dept

Service School for you!

Aston Martin / Historic Photos

British Leyland

WCBR Photos

Cool LR Photos, THRUST 2, THRUST SSC

2000TC in BAJA Mexico

Event Schedule

Railroad Adventures

SMOG STATION

Danville d'Elegance

Tamed Racing Driver

Photography

TOYS!

Vehicle Rentals

 

Updated: 1/2013

 

Visit our other sites....

www.OffRoadExperience.com

www.westcoastbritishracing.com

LINKS

this site is protected by Copyright 1981-2012 All Rights Reserved.

 

1964 Hi-Floatation for Shell Oil

 

Jim Joss in Canada

 

Jet-1 1950

 

 

80" at Quail Lodge.

 

?

Boating Nevada style!

 

It's Not a Christmas Party 2005.

Our Fire Crew 2006!

 

 

 

 

 

West Coast British - Technical Bulletin
190 Airway Blvd., Livermore, CA. 94551. Phone 925-606-8301/Fax 925-606-8302

Date: November 1, 2000 (up-dated 8/2006)
Subject: Oil Cooler Hose Replacement, 3.9/4.0L V8
Vehicle: Range Rover 1989-95, Discovery 1994-99, Def 90/110. 

WARNING: This warning that could possibly save you from serious injury and damage or loss to your Rover, such as burning to the ground!



We have found that the rubber portion of the ENGINE OIL COOLER pipe/hose combination (2-each) can over time become hard and brittle... at speed these hoses can, and have burst! The end result is hot motor oil spraying the exhaust system, which can the ignite the oil. In some case cars have burned to the ground!

This same WARNING applies to P/S (x3) and A/T cooler hoses.

Any vehicle over 8-years old or over 90,000 miles should have these hoses Inspected and Replaced. 

Note: Eurospare UK makes/sells replacement hoses for the Defender V8, the problem is... theses hoses are approx +.080" wider at the banjo fitting than Genuine LR, and since they are not supplied with new banjo bolts and washers, they will NOT fit, as the genuine LR banjo bolts will be too short. Suggest you buy Genuine hoses or make custom one from your hoses.

 

Back to Technical Bulletin main page